304 stainless steel angle steel/304 stainless steel channel steel

　　Shandong Taps Metal Products Co., Ltd. processing flow

　　 The materials used in the processing of stainless steel products are carefully selected, and there must be no cracks, scars, etc., and the processed materials must not have oxide skin or over-pickling.

A detailed description:

　　 Features of stainless steel processing products:

　　 has a metallic texture;

　　 have the feeling;

　　 is lighter;

　　 has a strong three-dimensional effect;

　　 There is a distinction between brushed and shiny;

　　 The materials used in the processing of stainless steel products are carefully selected, and there must be no cracks, scars, etc., and the processed materials must not have oxide skin or over-pickling. Stainless steel materials should be classified and stored in storage. They should not be placed randomly. Regularly, stainless steel should be transported in large vehicles. Stainless steel should not be used because there are creases in the transportation. If there is a crease, if there is no way to remove the crease , The stainless steel material can only be cut into small pieces for use, which is a big waste for the material.

The technology of processing, forming and welding must be carried out on a special platform. Polishing or cutting should not be carried out in places with many pits and pits, otherwise it will get twice the result and the quality of the products produced is poor, and there is no way to market sell.